How to Recover Data from a Failed Hard Disk

Data recovery software to recover data from a failed hard disk is easily available. The best hard disk recovery software available for this kind of recovery is competent enough to restore the deleted data into your system. Now there are indeed some successful methods that can also help in recovering data from the failed hard disk. One of such experimented techniques is the freezing method which is not at all a myth, but works successfully to bring back the data to life. 

Freezing a hard disk for recovering data cannot be used to fix the drive permanently, it is meant for a short span of time. You must make sure whether the drive is spinning or not as because if the drive spins then the data cannot be recovered. For recovering the desired data the drive must not spin. In case of spinning, it is generally considered that the drive is not corrupted physically and that you must seek other process in order to attain hard disk data recovery. 

First and foremost you must make sure that you are absolutely ready for Data Recovery Software. This is because for the recovery process you will need fresh hard disk or a different computer setup and if none of these factors are available readily, you must keep the process on hold until you arrange any one of the factors. The reason behind this is that there is no use of freezing the old hard drive if you cannot able to copy the data right away from the old to the new drive. This process requires instant action. The moment you freeze the old hard disk you must be ready to copy the data to the fresh hard disk and this can only help you to recover data files. Help from different data recovery software can also be taken in order to get the task done.

 


While freezing the hard disk, you must maintain some procedures regarding Best Hard Disk Recovery Software. You need to place the hard disk rightly at the Ziploc bag available in the system and then have to seal it. To assure more safety you can place the drive initially into an anti-static bag and after which can easily put it into the Ziploc bag. Now for the next step, it is required to put the bag containing the drive into a freezer normally for two hours. If the trick fails you can try again by keeping it for more than two hours, into the freezer. Just after removing the drive from the freezer, you must instantly put it into the computer and install it as a slave drive and after which you should boot the disk. If this method works, it will allow you to access the data and then for around 20 to 30 minutes the drive may continue working. You must quickly recover the data required before it gets collapsed.